Which of the two choices is better will really depend on what you're using the van for. The Thermoplastic mat is 1/2 an inch thick, and would offer better skid resistance. The carpet is thicker, at 3/4 of an inch thick so therefore it'd offer better protection for the floor of the van.
If you were carrying heavy, bulky items I'd want the thicker # VRDP14M carpeted mat. For lighter items, the # VTDP14M thermoplastic mat would work just fine for you. view full answer...
The Tekonsha Replacement OEM Tow Package Wiring Harness # 22112 that you referenced is intended as an OEM replacement on vehicles that have the factory-installed tow package. If this is what you vehicle's OEM harness looks like it will work fine without generating any messages on your display or requiring dealer attention.
However, if your van does NOT have factory wiring you can use one of the three 4-pole harness options shown on the linked page. All of these use powered converters... view full answer...
To add a 7-way trailer wiring connector to your 2014 Dodge ProMaster 1500 we have the Tekonsha Kit part # 22112 which will give you basically an OEM 7-way kit confirmed as a fit for your vehicle.
This comes with everything you would need to add a 7-way to your vehicle. view full answer...
The adjustment of any friction sway control system like # 83660 is relatively simple. Basically, you will drive with the trailer loaded to determine if more or less tension is needed. Then you will either make it tighter or looser my turning the handle in 1/4 turn increments. Then do another test. Keep doing this until you reach the desired result.
I attached an install video for a friction sway control unit for you to check out as well. view full answer...
The Pacer Performance Hi-Five LED Truck Cab Lights part # PP20-247C are universal cab lights that are designed to work on a variety of vehicles. The style and design of the lights are similar to the factory Dodge cab lights.
Each light requires three holes to be drilled if you do not already have cab lights. There are two mounting holes and one hole for the wires. The kit comes with a template that makes tracing and drilling the holes relatively easy. Once the mounting holes are drilled... view full answer...
Go To Results